The EZ Seal stainless steel weld-less bulkhead fitting by Minibrew®
Now you can have stainless steel threads on any tank within seconds. We are so confident in the EZ Seal we use them for the racking port and yeast dump/fill valve threads on all our world class conical fermenters, mash tuns, and hot liquor tanks.
- Internal female thread sizes are 1/2", 3/4", and 1"
- Easy to Install
- Has thread on both sides of the internal hole
- Easy to remove for cleaning - Use adjustable wrench
- Food grade
- Leak free
- FDA Red Buna Gasket
Install As Easy as 1-2-3:
- First decide where you want to locate the threads.
- we recommend a hole saw or step drill bit.
- 1-1/8” diameter hole for the 1/2” EZ Seal
- 1-3/8” diameter hole for the 3/4” EZ Seal
- 1-5/8” diameter hole for the 1” EZ Seal
- Install the bolt with the washer at the base, pushing it through your hole from the inside of the tank.
- Screw the nut counter clockwise onto the bolt.